NuMex Plastics, Inc.
Polyethylene tubing designed to match the outside diameter of copper tubing.
ASTM D-2737 (SDR-PR) Based on Controlled Outside Diameter
This specification covers polyethylene pipe made in standard thermoplastic pipe dimension ratios and pressure rated for water at 73.4°F. Pipe manufactured under this specification is based on a controlled outside diameter which is designed to match and mate with copper tube using copper tube size (CTS) compression couplings.
Pipe manufactured to this specification is described using a prefix-diameter ratio. The prefix for ASTM D-2737 is SDR.
The most common ratio under this specification is SDR-9. The definition of SDR (Standard Dimension Ratio) is the specific ratio of the average specified outside diameter to the minimum specified wall thickness.
SDR-9 service tubing is available in black as well as black with a blue stripe.
CTS Standard Dimension Ratio SDR-9 250PSI NSF Certified
CTS Standard Dimension Ratio SDR-9 250PSI NSF Certified | ||||
---|---|---|---|---|
Nominal Size | Nominal O.D. | Min. Wall Thickness | Wt / 100' | Standard Coil Lengths |
3/4" | 0.875" | 0.102" | 10.3# |
100'
300'
500'
|
1" | 1.125" | 0.130" | 16.9# |
100'
300'
500'
|
1-1/4" | 1.375" | 0.158" | 25.0# |
100'
300'
500'
|
1-1/2" | 1.625" | 0.186" | 34.8# |
100'
300'
500'
|
2" | 2.125" | 0.242" | 59.4# |
100'
200'
300'
500'
|